TWOBITS_Com

Video Game Monitor pinouts

The monitor cable on your game will be one of three types: The Video Input connector on the LCD monitor is a 10-pin connector with the first 6 pins separated from the last 3 pins by an open space.

THE CHART BELOW IS TYPICAL OF PAC-MAN AND MS.PAC-MAN CABINETS

PIN ON GAME BOARD

WIRE COLOR @ MONITOR

FUNCTION

PIN ON MONITOR BOARD

T

RED

WHITE TRACE

RED SIGNAL

1

16

WHITE

BROWN TRACE

GREEN SIGNAL

2

U

YELLOW

BLACK TRACE

MAY BE PINK

BLUE SIGNAL

3

S

GREEN

RED TRACE

GROUND

4

 

17

ORANGE

RED TRACE

COMPOSITE SYNC

9 and 10

Ms.PAC-MAN PINS ONE through TEN IN ORDER:
RED GREEN BLUE GROUND (5,6,7,8 EMPTY) SYNC SYNC

SPECIAL NOTES for 60 in ONE, 48 in ONE, 39 in ONE and other multicade type game boards:
TURN OFF DIP SWITCH #2 on your game board to enable RGB output, NOT VGA output.
You should NOT make the non-composite sync jumper of the LCD monitor.
Connect RED-GREEN-BLUE-GROUND from the game board to pins 1, 2, 3 and 4 of the LCD monitor.
Connect the SYNC wire from the game board ONLY to PIN 10 of the LCD monitor.


Order your new LCD monitor today for immediate shipping:


LCD19
for
UPRIGHT
19" RGB VIDEO GAME monitor
$389.00
Complete, ready to plug in monitor
With mounting brackets to fit all 19" full size UPRIGHT CABINETS.
LCD19
for CT
TABLES
19" RGB VIDEO GAME monitor
$389.00
Complete, ready to plug in monitor
With mounting brackets to fit all 19" Bally / Midway COCKTAIL TABLES.

 

4418 PACK SADDLE PASS

AUSTIN,  TX  78745

SALES@TWOBITS.COM

512-447-8888